Remote Safety needle valve assembly for MVVS .21 -
.90
8.93
7.50
Y
3213
RC carburetor for MVVS .12 and .15. This carb has
5.5 mm venturi and 11 mm mounting neck.
14.28
12.00
Y
3213-150
set screw+nut for carb drum
€1.78
€1.50
Y
3213-250
fuel needle
€2.38
€2.00
Y
3213-252
spray bar assy (includes needle)
€5.35
€4.50
Y
3213-302
carb drum lever
€1.19
€1.00
Y
3213-308
carb lever screw
€1.19
€1.00
Y
3215/26
RC carburetor for MVVS 1.6 has 10 mm venturi
and 17 mm mounting neck. (see 3216 carb for parts)
18.20
15.30
Y
3215/35
RC carburetor for MVVS 2.15 has 10 mm venturi and
18 mm mounting neck. (see 3216 carb for parts)
19.04
16.00
Y
3216
RC carburetor for MVVS .21-.49 has 7 mm venturi and 13 mm mounting neck
20.83
17.50
Y
3216-250
fuel needle
€2.38
€2.00
Y
3216-252
spray bar assy (new type, includes needleS)
€5.35
€4.50
Y
3216-253
KIT nozzle+needle for .21 -.77 (cures rich mid-range in old type MVVS carbs that have the idle needle outside the spray bar at full throttle))
6.55
5.50
Y
3216-302
carb drum lever
€1.19
€1.00
y
3216-304
drum lever nut
€1.19
€1.00
y
3216-350
idle needle assy (with spring)
€2.09
€1.76
y
3216-401
carb securing bolt
€1.04
€0.88
y
3216-402
carb securing bolt nut
€0.14
€0.12
y
3219
RC carburetor for MVVS .61 - .91 has 8mm venturi and
13mm mounting neck. (see 3216 carb for parts)
20.83
17.50
Y
3219Q
RC quickie carburetor with 9mm venturi (see 3216 carb
for parts)
20.83
17.50
Y
3220-130/26
D10-WAT Walbro membrane kit for WA and WT types 26/40/50cc
14.27
11.99
Y
3220-130/58
D20-HDA Walbro membrane kit for HDA types 58-80cc
14.27
11.99
Y
3220-130/116
D10-WB Walbro membrane kit for WB types 116-152cc
14.27
11.99
Y
32240
Walbro carb for MVVS 26cc
69.37
58.29
Y
32241
Walbro carb for MVVS 35cc and 40cc
69.37
58.29
Y
3224-x
Walbro carb for MVVS 45cc
76.54
64.32
Y
3227
Walbro carb for MVVS 58cc
82.53
69.35
Y
3228
Walbro carb for MVVS 116cc twin
108.83
91.46
Y
3227 D
Tuning Intake diffusor for 3224 and 3227 carb series
(small walbro)
16.66
14.00
Y
3228 D
Tuning Intake diffusor for 3228 carb 116/152cc (large
walbro)
16.66
14.00
Y
Accessories, general
3301
Glow plug hot C5 for 2 - 4.6cc (1/4")
6.30
5.30
Y
3302
Glow plug cold C6 for 6.5 - 35cc (1/4")
6.54
5.50
Y
3306
Spark plug Brisk UR17 or NGK BMR6F (M14x1.25)
4.39
3.69
Y
3309
Spark plug NGK CM6 (M10x1)
10.41
8.75
Y
3360
Prop driver long - set for MVVS 58cc
15.47
13.00
Y
3361
120mm Mounting plate + ISO buffers, for MVVS
3.6 and 2.7 ; two needed (see note**) click here for
mounting manual and parts list. Mounting rubber replacement set,
see 3361-14
22.12
18.59
Y
3361-14
Rubber ISO mounting kit.Replacement Set of 4 rubber
damper assemblies without the engine mounting plate(s).The set includes
all stand-off parts that are needed for softmounting your engine or repairing
the 3361 softmount system.
click here for mounting manual and parts list.
21.36
17.95
Y
3362
140mm Mounting plate + ISO buffers, for MVVS 3.6
and 2.7 ; two needed (see note**) click here for
mounting manual and parts list. For Mounting rubber replacement set, see
3361-14
25.12
21.11
Y
3364A
standoff mount, set of 4, 21-35 mm long
13.16
11.06
Y
3364B
standoff mount , set of 4, 36-50 mm long
14.35
12.06
Y
3364C
standoff mount, set of 4, 51-65 mm long
15.55
13.07
Y
3365
standoff mount kit, for 116 and 152cc. (280 grams)
Standoff height is 68.5mm without washers. This will allow the carburetor
to stay in front of the firewall.
Total length mounted on engine to back of propeller:
116cc = 228.5 mm
152cc = 238.5 mm
Radiator kit for 58cc LC (For cooling pump see item
3395) . The kit includes Radiator, hoses, hardware, and expansion tube.
Radiator main dims are 107 x 140 x 40 mm. Hoses have 8mm Inner diameter.
The pump (item is included with the engine, but can also be ordered as
Item 3395
129.33
108.68
Y
3380
Hardened steel MVVS propellor drill jig, universal
for all MVVS engines
25.88
21.75
Y
3394R
Radial mount for 1.60 26cc engine Red or Blue, includes
longer rear cover screws for mounting to engine.
60 grams, 10.4mm standoff height. Dimensions ,
Mounting instructions
(engine not included)
22.00
18.50
Y
3395
Water pump with mounting bracket for 58cc LC engine (for radiator kit see item 3370) This pump is included with engine 3001LC, but can be ordered as separate item.
127.62
107.25
Y
3398
Radial mount for 35cc and 40cc engine. Red or
Blue, includes longer rear cover screws.
88 grams, 19.5mm standoff height. Dimensions , mounting instructions
(Engine not included)
22.55
18.95
Y
3410
For engines: 50*, 58, 116 cm 3 .
Double chamber exhaust made from aluminum. Supplied with teflon coupler 3417
+ clamps 3418.
3413B
aluminum header with drop towards cylinder head,
for 58, 116 ccm, uses a teflon coupler.
For exhausts: 3410 / 3411 with coupler 3417.
Made from aluminum. Supplied with exhaust gasket.
Weight: 96 g
3413P
aluminum header with drop towards crankshaft, for
58, 116 ccm, uses a teflon coupler.
For exhausts: 3410 / 3411 with coupler 3417.
Made from aluminum. Supplied with exhaust gasket.
Weight: 96 g
3417
Teflon coupler,
For exhausts: 3280, 3410, 3411.
For headers: 3413P/B.
Included with exhausts 3410 and 3411.
Coupler inner diameter: 28mm
3418
Steel spring clamps For exhausts: 3410, 3411.
For headers: 3413P/B.
Included with exhausts.
Fits Coupler inner diameter: 28mm
000smoke
smoke fluid pump (3W)
105.50
88.66
Y
Put-RS959
Putoline RS959 two stroke racing oil, SAE30 weight (oil mix 2% - 4%) , for (forced) air cooled applications, cool running engines, cool climate.
RS959 is the ultimate Grand Prix Road Racing 2-stroke oil. Putoline RS959 represents the very latest in 2-stroke racing oil technology. RS959 utilises a highly sophisticated combination of additives, which ensure that exceptional film strength and load-carrying properties are achieved and maintained in even the most extreme racing conditions
Composition: 100% Synthetic
This oil runs slightly faster than the MHX oil, because of the lower viscosity.
Specification: JASO FC/ ISO-L-EGD/ API TC++
Colour: tan; Application:
Suitable for pre-mix and autolube injection systems
Recommended for Road Racing
Recommended mixing ratio: 2-4% (1:50 to 1:25)
16.69
14.03
Y
Put-MHX
1 liter
Putoline MHX two stroke racing oil with elevated viscosity for high temperature operation,
Composition: 100% Synthetic
Specification: Surpasses JASO FC/ ISO-L-EGD/ API TC++
Colour: Dark Blue, Application:
Suitable for pre-mix,
Recommended mixing ratio: 1-4% (1:100 to 1:25) This wide range makes it suitable for almost any application and manufacturer prescription.
22.00
18.50
Y
Put-karttech2 1 liter
Putoline Kart Tech 2 two stroke racing oil, castor/synthetic, for gasoline, methanol and nitromethane racing fuels. Oil Mix 4% - 15% (1:25 to 1:7)
Kart Tech 2 is the ultimate race proven synthetic ester & castor based lubricant. Its specially selected additives make it extremely suitable to lubricate today's high revving 2-stroke Kart engines. Kart Tech 2 is a premium synthetic ester & castor based racing oil that contains advanced additives providing improved film strength and load carrying properties.
Composition: Synthetic ester & castor based
Colour: brown, Application:
Pre-Mix only
Suitable for use with high-octane gasoline and Methanol racing fuels Suitable for model glow and diesel engines
Do not mix with other oils
Can be mixed with Methanol, Nitromethane as well as conventional fuel
Attention! Mix very thoroughly! Do not mix more than you will use within 1 day!
18.47
15.43
Y
000mobil-1/4 liter
Mobil1 two stroke racing oil (made for MVVS; racing oil as included with their engines) 1/4 liter bottle, for 10 liter fuel Specification: Surpasses JASO FC/ ISO-L-EGD/ API TC++
Colour: Red
6.59
5.99
Y
000mobil-1 liter
Mobil1 two stroke racing oil (made for MVVS; racing oil as included with their engines) 1 liter bottle, for 40 liter fuel . Specification: Surpasses JASO FC/ ISO-L-EGD/ API TC++
Colour: Red
23.20
19.50
Y
Aspen-2T 1 liter
Excellent two stroke oil for 1:30 - 1:50 mix. This oil has good cleaning properties and slightly more viscosity (12cSt@100°C) to keep lubricating well at elevated engine temperatures. Specification: Surpasses JASO FC/ ISO-L-EGD/ API TC++
In a tow plane MVVS 58, the engine was clean like new and NO ring wear after one season of heavy duty operation on Aspen fuel 1:50 mix.
17.25
14.50
Y
Frequently asked Question:"what is VAT", and "why are there
two prices?"
VAT is Dutch value added tax (BTW), and only applies to European community citizens.
The 19% VAT including prices are in left column. The VAT rate of the selling
country applies (19% for the Netherlands).
For goods traffic within the European community, no import taxes are charged
by the respective customs departements, because VAT has been paid already.
Outside the European Community, VATpayment is not required,
but you may be required to pay import taxes. Ask your countries customs dept. if you need further information.
Notes:
** For rear mounting of the 58cc or 43cc engine, two each mounting plates
3361 and/or 3362 must be used, which can be interchanged
Stock codes:
Y (or amount) =in stock
N (or blanc)=not in stock
BO= PRME Back order, Waiting for deliveries
to order= will be produced to customer order only. (no regular stock position at supplier)
