Back to HOME
Currency Converter:
click here for converting Euros into your own currency

RCexl Ignitions and Accessories


SEnsor MOUNTING INSTRUCTIONS

Ignition timing setup (By RCextremepower.com)
Plug cap replacement   (also see RCU article with much information)
Trouble shooting your RCexl ignition (RCUniverse article)

Never operate CDI ignitions without plug in the boot, and the plug well grounded.

Stock codes:
Y (or amount) =in stock
N (or blanc)=not in stock
BO= PRME Back order, Waiting for deliveries
available= regular stock position of supplier
to order= will be produced to customer order only. (no regular stock position at supplier)
15-April 2012    
Price
Price
Availability   Weight
code   name
Incl. VAT
Export
Stock Buy now button (grams)
RC03 twin ignition for -NGK -CM6- (M10 spark plug)
€66.94
€56.25
Y
182.0
RC04 twin ignition for -NGK -BPMR6F- (14MM taper seat sparkplug)
€60.24
€50.63
Y
189.0
RC07 Single ignition for NGK ME-8 (1/4-32 sparkplug 90°)
€55.78
€46.88
Y
117
RC09

single ignition for -NGK -CM-6--10MM spark plug
(Hex 14mm)

€55.78
€46.88
Y
125.0
RC10 Single ignition, Zenoah G20EI/26EI CM6 conversion kit cpl. (ignition#RC9 + bracket #RC44)
€56.88
€47.80
Y
 
RC12 single ignition for -NGK-BMR6F-14MM taper seat spark plug (Hex 16mm)
€50.21
€42.19
Y
132.0
RC13 Single ignition, Zenoah G45/G62 BPMR6A conversion kit cpl. (ignition#RC15 + conversion kit #RC43)
€70.00
€58.83
Y
 
RC15 single ignition for -NGK-BPMR6A-14MM flat seat spark plug ( Bosch cap, Hex 19mm)
€50.21
€42.19
Y
132.0

Goto top

RCexl Parts list
RC16 spark plug caps and boots for 1/4-32  KIT  90 degree
€11.16
€9.38
Y
8.4
RC18 Spark plug caps and boots for NGK CM6 10mm Kit
€11.16
€9.38
Y
11.3
RC19 Spark plug caps and boots for taper seat NGK -BMR6F-14MM KIT
€10.04
€8.44
Y
17.0
RC20 Spark plug caps and boots for straight seat NGK -BPMR6A-14MM KIT (Bosch boot cap)
€10.04
€8.44
Y
19.0
RC21 14mm to 10mm spark plug bushing adapter(brass)
€4.46
€3.75
Y
6.9
RC22 14mm to 1/4-32 spark plug bushing adapter (brass) (for spark to glow conversion)
€4.46
€3.75
Y
6.7
RC23 Hall sensor kit.
€3.34
€2.81
Y
6.6
RC24

1/4x32 spark plug (glow plug thread)

€10.71
€9.00
Y
35.0
RC26

NGK BPMR6A spark plug.
M14x1.25 flat seat, 19mm hex (for zenoah)

€5.58
€4.69
Y
35.0
RC51 Spark plug NGK CMR7H (M10x1, 19mm long reach)
€5.58
€4.69
Y
 
3309 Spark plug NGK CM6 (M10x1)
€10.41
€8.75
Y
 
RC47 ICM-6 Iridium tip M10 spark plug (made by RCexl) M10x1, flat seat, 14hex
€8.93
€7.50
Y
14.0
RC48 Spark plug RCexl CM6 (M10x1)
€4.46
€3.75
Y
 
RC50 NGK BMR6F 14mm taper sear spark plug (16mmhex)
€8.93
€7.50
Y
14.0
RC27 Rcexl ignition Mini Tachometer V1.2
€12.27
€10.31
Y
16.0
RC28 Rcexl ignition hall sensor test kit
€5.58
€4.69
Y
30.0
RC29 Rcexl ignition box test
€3.34
€2.81
Y
4.5
RC30 Rcexl opto gas engines kill switch
V2.0, type K1. To remotely kill your engine ignition. Also kills if Receiver signal fails.
€12.27
€10.31
Y
17
RC31 Switch harness + Fuselage charge mount plate
€4.46
€3.75
Y
17.5
RC32 Small Switch Harness w/cord
€3.34
€2.81
Y
13.5
RC33 Rcexl Deans 3 pin connector (+ mounting Bracket)
€1.12
€0.94
Y
2.0
RC34 Rcexl Deans 3 pin connector
€1.12
€0.94
Y
1.4
RC35 Rcexl Deans T-Style Ultra Plug (high current)
€0.79
€0.66
Y
4.3
RC36 Rcexl Deans Micro Plug (1 pair) (plugs in only one way)
€0.79
€0.66
Y
1.0
RC37 Plug holder  for RC34
€0.12
€0.1
Y
0.4
RC38 Y-cable (Futaba connector system)
€1.19
€1.00
Y
 
RC41 In CM-6 Spark Plug Cap Spring(TWO pcs) (to improve stable plug boot contact with spark plug body)
€0.23
€0.19
Y
1.6
RC42 In 1/4-32 Spark Plug Cap Spring(TWO pcs)
€0.23
€0.19
Y
1.5
RC43 Zenoah G45;G62;GT80 ignition Conversion Kit includes flywheel and bracket  (ignition not included)
€21.19
€17.81
Y
50
RC44 Zenoah G20EI ; G26EI; RCEXL Ignition Hall Sensor Bracket
€1.12
€0.94
Y
10
RC45 Zenoah G26SC G26SLH G26SCM G26SLH Conversion Kit includes flywheel and bracket (ignition not included)
€21.19
€17.81
Y
50
RC46 Zenoah G38 Conversion Kit, includes flywheel and bracket (ignition not included)
€21.19
€17.81
Y
50
RC54 no image Magnet 3x3mm
€0.47
€0.40
Y
 
RC55 no image magnet 4x4mm
€0.53
€0.45
Y
 
     
     

Mounting the sensor to the bracket:
First test the inition hall sensor with the magnet. Passing the sensor over the magnet should produce a spark.
If not, turn sensor 180 degrees.
Then fit the sensor in the sensor bracket like shown in picture. Now test again, and if OK, fix the sensor in place with the small rubber wedge.
(Goto end of page)

Sensor bracket mounting. (set spark timing at 28° before top dead center).
For plug cap replacement, please scroll down.

Plug cap replacement.


.

.

.

.

.

.

.